Cisco: SDSL back-to-back

Netjes gejat van een franse website:

Configuration du Cisco 1803 en mode CPE ( Customer Premise Equipment )

c1803#configure terminal
Enter configuration commands, one per line.  End with  CNTL/Z.
                                                       
c1803(config)#controller dsl 0
c1803(config-controller)#line-term cpe
c1803(config-controller)#mode atm
c1803(config-controller)#line-mode 4-wire
c1803(config-controller)#no shutdown
c1803(config-controller)#exit
c1803(config)#interface ATM 0
c1803(config-if)#pvc 8/35
c1803(config-if-atm-vc)#encapsulation aal5snap
c1803(config-if-atm-vc)#exit
c1803(config-if)#ip address 10.1.1.2 255.255.255.252
c1803(config-if)#exit

Configuration du Cisco 2621XM en mode CO ( Central Office )

c2621xm#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
c2621xm(config)#controller dsl 0/0
c2621xm(config-controller)#mode atm 
c2621xm(config-controller)#line-term co
c2621xm(config-controller)#line-mode 4-wire
c2621xm(config-controller)#no shutdown
c2621xm(config-controller)#exit
c2621xm(config)#interface ATM 0/0
c2621xm(config-if)#pvc 8/35
c2621xm(config-if-atm-vc)#encapsulation aal5snap
c2621xm(config-if-atm-vc)#exit
c2621xm(config-if)#ip address 10.1.1.1 255.255.255.252 
c2621xm(config-if)#exit