Cisco: Multicast

From Frotmail Projects
Revision as of 19:14, 4 April 2022 by Eric (talk | contribs) (Created page with "Ripped from [http://roggyblog.blogspot.com/2009/10/multicast-lab-with-vlc-howto.html] BSR info: [http://blog.ine.com/2009/04/07/understanding-bsr-protocol/] R1 ! ip multicast-routing ! ! interface Loopback0 ip address 1.1.1.1 255.255.255.255 ip pim sparse-mode ! interface FastEthernet1/0 description wan ip address 10.0.12.1 255.255.255.0 ip pim sparse-mode duplex auto speed auto ! interface FastEthernet2/0 description lan ip address 192.168.1...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Ripped from [1]

BSR info: [2]

R1

!
ip multicast-routing
!
!
interface Loopback0
 ip address 1.1.1.1 255.255.255.255
 ip pim sparse-mode
!
interface FastEthernet1/0
 description wan
 ip address 10.0.12.1 255.255.255.0
 ip pim sparse-mode
 duplex auto
 speed auto
!
interface FastEthernet2/0
 description lan
 ip address 192.168.1.1 255.255.255.0
 ip pim sparse-mode
 duplex auto
 speed auto
!
router ospf 1
 router-id 1.1.1.1
 log-adjacency-changes
 network 1.1.1.1 0.0.0.0 area 1
 network 10.0.12.0 0.0.0.255 area 0
 network 10.0.13.0 0.0.0.255 area 0
 network 192.168.1.0 0.0.0.255 area 1
!
!Define this router as a RP
ip pim rp-candidate Loopback0
!

R2

ip multicast-routing
!
interface Loopback0
 ip address 2.2.2.2 255.255.255.255
 ip pim sparse-mode
!
!
interface FastEthernet1/0
 description wan
 ip address 10.0.12.2 255.255.255.0
 ip pim sparse-mode
 duplex auto
 speed auto
!
interface FastEthernet1/1
 description lan
 ip address 192.168.2.2 255.255.255.0
 ip pim sparse-mode
 duplex auto
 speed auto
!
router ospf 1
 router-id 2.2.2.2
 log-adjacency-changes
 network 2.2.2.2 0.0.0.0 area 2
 network 10.0.12.0 0.0.0.255 area 0
 network 192.168.2.0 0.0.0.255 area 2
!
!Define router as a Bootstrap Router Candidate
ip pim bsr-candidate Loopback0 0
!

File:Multicast.jpg

Note: ip pim bsr-candidate and ip pim rp-candidate can both be added to the same router if you wish. Therefore in this lab we could of defines both on R1 and left R2 with only ip pim sparse on its interfaces.

Here are the batch files used in VLC: StartMulticast.bat:

"C:\Program Files\VideoLAN\VLC\vlc.exe" -vvv test.m4v :sout=#transcode{vcodec=h264,vb=800,scale=1,acodec=mp4a,ab=128,channels=2,samplerate=44100}:std{access=udp,mux=ts,dst=239.0.0.1:1234} --ttl 12

StartVideo.bat

call "C:\Program Files\VideoLAN\VLC\vlc.exe" -vvv udp://@239.0.0.1:1234