All public logs

Combined display of all available logs of Frotmail Projects. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 19:05, 4 April 2022 Eric talk contribs created page NTP-Source (Created page with "How to NTP a Raspberry Pi 4 via GPS and PPS This also works on Pi 3. =Hardware= A GPS with serial connected to the Pi’s serial port, and PPS connected to gpio 18 (physical pin 12 on the GPIO connector) If possible, configure GPS to output GPZDA at 9600 baud. GPSD will find other baud rates, but takes approximately 8 minutes to get to 115200, and 9600 is the first one it tries. sudo raspi-config disable serial console login, enable hardware serial port sudo apt in...")