NTP-Source: Revision history

Jump to navigation Jump to search

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

4 April 2022

  • curprev 19:0519:05, 4 April 2022‎ Eric talk contribs‎ 1,049 bytes +1,049‎ Created page with "How to NTP a Raspberry Pi 4 via GPS and PPS This also works on Pi 3. =Hardware= A GPS with serial connected to the Pi’s serial port, and PPS connected to gpio 18 (physical pin 12 on the GPIO connector) If possible, configure GPS to output GPZDA at 9600 baud. GPSD will find other baud rates, but takes approximately 8 minutes to get to 115200, and 9600 is the first one it tries. sudo raspi-config disable serial console login, enable hardware serial port sudo apt in..."
Retrieved from "https://wiki.frotmail.nl/index.php/NTP-Source"